SHOWER INSTALLATION MADE SIMPLE - A COMPLETE GUIDE FOR NEW UNITS

Shower Installation Made Simple - A Complete Guide For New Units

Shower Installation Made Simple - A Complete Guide For New Units

Blog Article

Request Free Estimate



Are you currently in search of tips concerning How to Install a One-Piece Shower Unit?


Simple ways to Install a Shower Cubicle on Your Own
An effective shower installment needs mindful preparation and also a great deal of job. In most cases, you will need to do three kinds of tasks: framing wall surfaces, setting up the plumbing, and also ending up wall surfaces.

Prep work


Firstly, you must decide on the type of shower that you wish to install. It is essential to determine whether the chosen shower is capable of coping with certain systems and can regulate a safe level of water through the central heating boiler. Most shower units nowadays are created to be adaptable to various water stress (such as kept hot water as well as cool keys).
It is additionally vital to think about the water stress as well as the planning of the piping and drainage for the shower

Various Sorts Of Shower Units


  • Push-on Mixer: The pipe as well as spray parts of the push-on mixer shower unit can be connected to the bathroom faucet based on your need, and also the water temperature level can be readjusted using the faucets. Push-on mixers are cheap and also exceptionally straightforward to set up. Nevertheless, although the hose pipe connection is easy, it is easily dislodged. Additionally, it is inconvenient to readjust the temperature level.

  • Bath/Shower Mixer: The pipe as well as spray of this kind of shower are integrated with a bath mixer tap, and also the temperature level can be changed with the bath taps. It is a very economical alternative and also no additional plumbing is included. However, the bath/shower mixers also deal with troublesome temperature control options.

  • Manual Mixer: The tube and also spray of a hands-on mixer shower unit belong of the wall surface unit and also the cold and hot water supplies are attached to a single shutoff The temperature and stress of the water are controlled via either one or a range of knobs (in a lot more costly showers). Although temperature control is much easier in hand-operated mixer types, they are more pricey than the formerly mentioned mixers. They additionally need additional plumbing of cold and hot water system pipelines.

  • Thermostatic Mixer: The hose pipe and also spray of this shower type belong of the wall device and the cold and hot water supplies are attached to a single shutoff here as well. It is complete with a built-in stabiliser to self-adjust the water temperature level and to stop it from ending up being also hot. Among the greatest benefits of a thermostatic mixer shower type consists of practical temperature control. Nevertheless, it is the most costly of the different mixer choices.

  • Power Shower: A power shower is a single system containing an effective electric pump that can altering both the water pressure and also temperature. This kind of shower can be fitted if there is water from a cold water cistern as well as a warm water cylinder. A power shower makes the modification of both stress and also temperature simple. On the other hand, it disagrees for water heated directly by the shower or where the water is provided by a mix boiler under keys pressure.

  • Electric Shower: An electric shower is plumbed right into a mains cold water supply as well as it warms the water electrically. It is essential to keep in mind that for this shower type to be set up, the keys pressure needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The system permits the temperature as well as stress to be adjusted through a handle. Versions with temperature stabilisers are better as they stay untouched by various other faucets elsewhere in use within the household. A major disadvantage of electrical showers is that the control handle just permits the option of heats at much less pressure, or lower temperature levels at a better stress. This is problematic in the winter season when the spray is commonly weak and also the mains water is chillier. Nevertheless, this trouble is taken on in some models which are offered with a winter/summer setup.


  • Approach


    Relying on the type of shower you want to set up, the shower head have to either be suited order to avoid its contact with the water in the bath below or the base tray, or it has to have a check shutoff.
    Prior to beginning, it is suggested to note the placements of the shower head and also control, and also to intend the pipe-work entailed. In addition, the water drainage system to get rid of the drainage will need to be planned. Both positions of the cable television path as well as the shower button will certainly likewise require to be taken into consideration if a rapid or electrical shower device is being set up.
    Utilize the instruction guide provided with the shower device to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is essential to cut off the water supply. In order to shield the pipelines, they must be offered a water-proof covering as well as additionally fitted with separating shutoffs. The pipelines can after that be hidden right into the wall surface as well as glued over to neaten the general look.
    Fit the base tray, shower head, as well as fittings.
    Connect the main shower control to the pipelines that will certainly be providing the water (This might need a female screw thread adapter).
    Reconnect the water supply and also examination the pipelines for any type of leaks, as some may require firm.
    If you are setting up an electrical shower, remember to switch off the electricity supply prior to making any kind of electrical links. As soon as these connections have been made (there should be advice within the user's manual), the power supply can be changed back on.

    Adjusting Water Pressure to Match Your Shower


    The cold water tank can be lifted to a greater elevation (often as little as 150mm (6inches)) by fitting a solid wooden support under it - potentially composed of struts and blockboards. If you pick this choice, the main and also circulation pipes will certainly likewise have to be elevated to satisfy the new elevation of the tank.
    Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is chosen, it has to be linked into the power supply in order to run.

    Piping and Water drainage


    It is best to utilize 15mm diameter supply pipelines, and make the go to the shower as short and straight as feasible so as to keep maximum stress as well as minimise warm loss. Additionally, by reducing the use of joints for pipe edges, you can reduce the resistance in the circulation of the supply of water. You can achieve this by bending the pipelines rather.

    Many Typical Mistakes


  • Breaking or overlooking local code limitations.

  • Making use of pipes that are as well tiny.

  • Attaching copper to galvanized without utilizing a brass or dielectric suitable in between the two.

  • Not utilizing tape or pipeline compound at threaded joints.

  • Not leveling your components when mounting them.

  • Not installing an air space loading for fixtures.

  • Cutting supply stub outs also brief to install the shutoff valves onto after the completed wall surface is in location.

  • Not appropriately straightening tubing into installations or quit valves. (Forcing the nut onto the compression ring at an angle when the tubes goes to an angle will certainly cause a leak.).

  • When turning the water back on in your house, constantly run the outside hose pipe shutoff or flush your bathrooms to hemorrhage dirt as well as air from the lines. This particles can create problems in your sink taps and also other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Build a Shower Enclosure for Your DIY Bathroom

    We hope you enjoyed reading our article on How to Build a Shower Enclosure for Your DIY Bathroom. Many thanks for taking the time to browse our blog. Don't hesitate to take the opportunity to distribute this blog if you appreciated it. Many thanks for your time spent reading it.




    Book Now


    Report this page